Combine-harvester Lida-1300 has a modern three cylinder thrashing and separating system of high effectiveness. Threshing is performed completely and carefully. Excellent straw quality is provided owing to the low straw load during the direct harvesting.

Rotation frequencies of threshing cylinder, beater and separating cylinder fit each other in optimum way to provide an excellent flow of harvesting material. The rotation frequency of thrashing cylinder is regulated through the speed variator in the range from 640 to 1240 cycles per minute. With the help of the variator of the rotation frequency of the threshing cylinder required in case of corn or sunflower harvesting it is possible to restrict the rotation speed up to 314 cycles per minute. In three stages it is also possible to release the separating cylinder deck up to 65 mm of free passage, which is especially recommended with a very dry straw.

Furthermore, sub-cylinders with various tensions are available for different types of crops. Thanks to such a variety an optimal harvesting of all the crops is assured. Almost complete and careful threshing is carried out in special three cylinder threshing and separating system. Threshing cylinder diameter is 600 mm. Beater with the diameter of 395 mm and separating cylinder with the diameter of 570 mm also interact perfectly, having separating area of 1, 90 m.

Combine harvester Lida-1300 has an effective purification system, producing purified harvesting material ready for realization. Three-layer purification with the additional step of gradient is used on the combine - harvester. Owing to it an excellent separation and high level of purity is achieved.

An air- flow necessary for the purification is created with the help of special axial blower. Special axial blower, allowing using the airflow perfectly and providing its even distribution over the whole space of screen creates airflow for purification. Adjustable jalousie screens are the part of standard equipment.

To carry out harvesting with minimal losses, including harvesting on slopes the combineharvester is equipped with the distribution auger. It is a special device for prevention of harvesting material drift in case of cross incline of the combine-harvester.

6 cylinder engines that are very economical of fuel, provide sufficient power reserve. Driving-gears and hydraulics of high effectiveness conform ideally to the characteristics of the machines and help in perfect transmission of power to working parts.